MultiTherm has brought on a Myriad of new Heat Transfer Fluid Products
The leader in heat transfer fluids has brought on 8 new products that will fit your needs and process no matter what industry you are in.
(PRWEB) June 19, 2005 -- MultiTherm has the right fluid for your high
temperature process application and every fluid provides energy efficient,
non-hazardous, low viscosity applications that are recognized by USDA and FDA.
Temperatures range from 0F (-12C) to 600F (315C) and are offered as
follows:
- MultiTherm’s PG-1 is a high quality food grade heat transfer
fluid for use in closed loop, liquid phase heating and cooling systems and is
applicable to the Chemical, Food Process, Plastic, and Die Casting industries.
The unique formula of MultiTherm PG-1 assures performance without the potential
problems of many conventional fluids.
- MultiTherm’s IG-4 is a non-toxic
durable heat transfer fluid for closed loop systems. Some of the benefits
include a very low pressure system, excellent oxidation resistance, and a very
high flash point (440 F). Chemical, Commercial Laundries, Die Temperatures, and
Asphalt Storage are just a few of the applications
- MultiTherm’s 503
provides users with a non-toxic, low pressure alternative to chemical based
heating and cooling fluids. Its main application is where low pressure and high
efficiency is required. Heat loads can be achieved with lower flow rates,
smaller heat exchangers or lower approach temperatures. Applications include
Plastics Industry and Chemical Process industry.
- MultiTherm’s FF-1 is an
economical way to remove loose material such as weld splatter, fines, and
particulate matter, etc. left in lines and equipment, along with oil and some
preservative coatings. This fluid is used in start-up and maintenance
applications and when changing over to a new fluid.
- MultiTherm’s IG-1 has
been designed to offer an economical alternative and highly refined thermal
fluid for temperature ranging from 10F (-12C) to 550F (288C). Applications
include Asphalt, Paper and Particle Board, Die-Casting, and Roofing
Compounds.
- MultiTherm’s OG-1 has been designed to prevent oxidative
degradation and deposits in open and closed loop systems. MultiTherm OG-1 heat
transfer fluid is designed for a maximum film temperature of 600F and a maximum
system bulk temperature of 550F. MultiTherm OG-1 offers the benefit of having a
high flash point of 455F / 235C and a very low vapor pressure.
# # #
Source : http://www.prweb.com/releases/2005/6/prweb252567.htm